Gas Cylinder Supports
Essendant Trodat Printy Economy 12-Message Date Stamp Self-Inking 2x0 38 Black
Trodat Printy Economy 12-Message Date Stamp Self-Inking 2x0 38 Black
Med Vet International Miltex Padgett Crow Coagulating Forceps, 9.25in, Tungsten Carbide, insulated Handle, German, PM-9043
The Miltex name is synonymous with unparalleled quality and service to customers and surgical instrumentation produced with the utmost attention to consistent detail. The Miltex instruments includes both premium-grade German and American crafted stainless steel surgical instrumentation manufactured to exacting specifications. The surgical “feel” of these instruments, the outstanding cutting ability and the attention to delicate detail are just a few of the aspects that allow Miltex to outperform and stand out from the competition. These are Miltex Padgett Crow Coagulating Forceps. Crow Coagulating Forceps are for monopolar coagulation. They are made from premium-grade German stainless steel. Specifications: 9.25in, Tungsten Carbide, insulated Handle, PM-9043
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N007 is a 16 oz. dead blow plastic hammer with a 2-1/2 inch diameter striking face. It has a hollow head filled with steel and lead shot to prevent rebound and absorb shock. The handle is made of fiberglass reinforced nylon for durability. This hammer allows you to strike delicate surfaces without marring and is well-suited for assembling equipment or driving pins and stakes. It provides the striking force of a steel hammer with less rebound.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N017 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a 1.15 service factor, thermally protected, manual reset overload protector, and meets NEMA design B standards. This motor can be used for various industrial applications requiring 3/4 HP at 1725 RPM. It requires a 115V power source and measures approximately 9-1/4" in length x 7-3/16" in width x 8-7/16" in height. The 56C frame and ball bearings allow for rugged use.
Grainger Calibration Gas 116L 3-Gas Mix
The GASCO Calibration Gas - Nitrogen is a high purity nitrogen gas used for calibration and testing of gas detection equipment. It comes in a 103L cylinder with 99.998% nitrogen. The cylinder has a CGA 580 outlet connection and pressure of 2000 psig. The gas meets ISO 6141 standards and has a 2 year shelf life. Nitrogen is non-flammable, non-toxic and inert. This calibration gas is useful for checking nitrogen levels or calibrating nitrogen sensors.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N031 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA standard 56C frame with a 1.15 service factor. The motor is thermally protected and rated for continuous duty applications.
Grainger Calibration Gas 116L 3-Gas Mix
The GASCO Calibration Gas - Nitrogen is a high purity nitrogen gas used for calibration and testing of gas detection equipment. It comes in a 103L cylinder with 99.998% nitrogen. The cylinder has a CGA 580 outlet connection and is rated for pressures up to 3000 psig. This calibration gas meets standards set by the National Institute of Standards and Technology for use in calibration and bump testing of gas monitors and sensors. The cylinder should be stored and used in accordance with safety regulations for compressed gas cylinders. This is a high quality nitrogen gas for reliable calibration of gas detection systems.
Grainger Calibration Gas 116L 3-Gas Mix
The GASCO Calibration Gas - Nitrogen is a high purity nitrogen gas used for calibration and testing of gas detection equipment. It comes in a 103L cylinder with 99.998% nitrogen. The cylinder has a CGA 580 outlet connection and is rated for pressures up to 3000 psig. This calibration gas meets standards set by the National Institute of Standards and Technology for use in calibration and bump testing gas detectors. The cylinder should be stored and used in accordance with safety regulations for compressed gas cylinders. This is a high quality nitrogen gas for reliable calibration of gas detection systems.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N021 is a 3M Novec 1230 Clean Agent Fire Extinguisher that provides fast fire suppression for Class A, B, and C fires. This UL rated, 2.5 lb extinguisher uses Novec 1230 fluid which leaves no residue and is ideal for protecting sensitive electronics. It features a steel cylinder with red powder coat finish, discharge range of 9-15 ft, and discharge time of 9 seconds. The extinguisher comes with wall mounting bracket and has a gross weight of 3.75 lbs.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N066 is a 16 oz. dead blow plastic hammer with a 2-1/2 inch diameter striking face. It has a hollow head filled with steel and lead shot to prevent rebound and absorb shock. The handle is made of fiberglass reinforced nylon for durability. This hammer allows you to strike delicate surfaces like aluminum, plastic or glass without damage. It is well-suited for automotive, industrial and construction applications. The hammer measures 14 inches long overall and weighs 1.4 lbs.
